When restoring our classic Mopars, you have probably ran into the issue of finding some particular bolts. Some bolts like the large K-frame bolts, are not something you want to have break off while removing or driving. The good news is US Car Tool offers an array of unique, high quality fasteners for popular Mopar body styles.

US Car Tool found out quickly that they were not happy with some of the bolt offerings and found it difficult to find what they wanted. They spent hours researching  and testing exactly what bolts they needed. For years they just used these bolts for restoration use in house but have since decided that the home garage restorer could highly benefit from these same high quality fasteners. 

Restoring a 50+ year old car, bolts like those and many more have been through a lot of stress, weather, corrosion and more. If you were lucky enough to remove said bolt without snapping in two, it is best you replace them with new bolts. We have had too many instances where we have reused older bolts and had more issues with the bolts later down the road. 

These fastener kits have saved US Car Tool time and money over the years. No more searching through piles of bolts, no more worries if the bolt used is adamant enough and will thread in much, much easier. There are certain spaces, like the steering gear bolts, that have minimum space and using too long of a bolt or the wrong head might not allow you to tighten the bolt properly. It might feel tight until you go to drive the vehicle and then you start chasing a plethora of issues just because you used the wrong bolt.

Us Car Tool is not only your source of popular Mopar chassis stiffening products but also your stop for high quality fastener kits. If you are in the middle of a restoration or just starting, add US Car Tool in your bookmarks for your source of fasteners. Their kits range from fender fasteners to decklid and everything in between.