Gallery: Mopar Connection’s Top Ten Mopars of SEMA 2026

The first “SEMA Show” all started at Dodger Stadium in 1967, which at that time stood for “Speed Equipment Manufacturers Association,” and amongst the 97 booths were Airlift, Edelbrock, EMPI, Hedman, Hooker, Mickey Thompson, Milodon, Moon, NHRA, and Trans-Dapt. long time ago!

For the 2026 running of the trade show event, those companies are still exhibiting along with about 2,200 more companies today! When you realize that there’s now 26 miles of carpeting laid out during the set-up of the event, all max-outed over five huge exhibit halls of the Las Vegas Convention Center, plus outside everywhere you look, yeah, SEMA is a big deal.

Much has changed; it’s not just about headers, manifolds, camshafts, shifters and wheels anymore. The industry has undergone a huge transformation in the last decades, it’s still automotive passion and people all on the same wave length, just everything is much more advanced and sophisticated. Not a bad thing, just not too many carburetors and dual point ignitions seen there anymore!

There’s hot rods, muscle cars, resto-mods, trucks, off-road, classics, tuners plus tools and equipment galore. We walked the show and found the “the best of the best” of the various Mopar display cars and trucks and are highlighting the “Top Ten” that were found inside and outside, from the four full days that it took to see everything. Mopar lovers had plenty to see, much to see and absorb after traveling all corners of the Las Vegas Convention Center!

Kindig-It Design’s “Killer Bee” 1969 Dodge Super Bee
The original idea that came to create a wild ’69 Dodge Coronet “Killer Bee” (Kindig-it-Design Millcreek, UT) happened in 2023 by car owner Jason Johnson, and as these things take time the car was debuted at SEMA 2026! First thing was to incorporate a RS Fast Track IRS chassis upgrade, then a 3rd-gen HEMI with 1200 horsepower thanks to a 3-liter Whipple supercharger.

Big rollers in the way of 20/21 EVOD wheels and all topped with Sikkens Autumn Inferno metallic paint. Extreme detail from front to rear! The Mopar purists should be pleased that a real Super Bee was not hacked-up in creating this one-of-a-kind show stopper!

“Mopar Heaven” 1965 Dodge D100
Mopar Heaven is a massive all-Mopar event that takes place annually at the Texas Motor Speedway (Fort Worth, TX) and they participated at SEMA promoting the 2027 event, which will take place March 19-20, 2027. The group also brought along this classic 1965 Dodge pickup running on 20-inch wheels, modernized airbag suspension, powered by 6.2L Hellcat 707HP HEMI and Pistol Gripped TCI 4L80 transmission. Vintage Dodge short bed pickup got a new lease on life!

Ron Diebold’s “Hemispheric” 1965 Dodge A100
Clearly still under construction, Ron Diebold’s 1965 chopped Dodge A100 panel van was featured in the Hushmat display booth, caught a lot of attention especially when the side doors were open. Inside a new Mopar Direct Connection 392 HEMI!

Stock 1965 Dodge A100 vans had 225-cid Slant Six powerplants with an optional 273 V8 available, with many of them were in service commercially as delivery vans. When completed, anyone riding inside this “Hemispheric” Dodge van with its GEN 3 HEMI engine will know it’s there with that big K&N conical air filter sticking out between the seats!

Classic Car Studio’s “Brownfinger” 1970 ‘Cuda
From the Classic Car Studio Speed Shop (St. Charles, MO), led by Charles Crews, comes this sleek 1970 ‘Cuda, a top tier Mopar at SEMA 2026. Known as “Brownfinger” as a playful, tongue-in-cheek reference to “Goldfinger” as in James Bond, it’s kinda an inside joke.

When there’s a 1200-horsepower DSR (Don Schumacher Racing) 7.0L 426-cube Gen 3 HEMI under the hood, complete with 3.0L Whipple supercharger, coupled with an 8-speed BHP90 Bouchillon Engineering transmission, you know it’s a potent package. Brownfinger rides on an RS Fast Track IRS chassis and rolls on 19/20 HRS wheels. This classic E-body was voted “Best on RS” award and that’s a big deal as there were a lot of Roadster Shop chassis feature cars at the event!

Foose Edition 2027 Ram 1500 “Rumble Bee”
Part of the Fox Factory Vehicles program, a Foose-themed Ram pickup and available with 1,000 horsepower. Foose 22-inch wheels, Ridetech dropped suspension, Magnaflow exhaust, custom front spliter, side skirts, tailgate spoiler and plenty of graphics and emblems to let everyone know it has the full Chip Foose treatment. Some might get one as a collector vehicle and just keep it on blocks.

Arne Toman’s 1974 Dodge Monoco “Bluesmobile”
Jake and Elwood Blues would have greatly appreciated the added supercharged performance of this Hellcat-equipped 1974 Dodge Monaco! The big Dodge belongs to Arne Toman, famous for cross-country runs with his Mopar machine. Satera Tuning, the shop that did the conversion, reported a rear-wheel HP figure of 647.64 and also pulled an impressive 597.20 lb-ft of torque, shifted via an 8-speed HP90 transmission.

The vintage Mopar was driven from Illinois to Las Vegas (along the famous Route 66 much of the way) and with its movie car visuals it made for a unique SEMA display vehicle once it rolled into the Las Vegas Convention Center Central Hall!

1970 Plymouth ‘Cuda
Brought down from Manitoba, Canada, it’s a completely revised 1970 Plymouth ‘Cuda now with 6.1L HEMI crate engine. One look at the engine bay, the 16 spark plugs, the completely revamped firewall and inner fenders, the hood scoop design, then the interior, all-new dash layout. Loads of hours put into the build, tons of detail everywhere! Art Morrison chassis with lengthened wheelbase. Curtis Speed one-off wheels, park a stock 1970 Barracuda next to it and all the mods will jump out big time!

FiTech “Tri-Power” EFI ’70 Plymouth Road Runner
When you take a 1970 Road Runner and do it up as a tastefully-built-with-restraint resto-mod, it’s always good to have some features that have a tie-in to the days when you could walk into Chrysler-Plymouth dealership and buy a brand new Road Runner. Case in point – the 440+6 engine.

It has it, except a modernized twist using FiTech EFI “Tri-Power” which is a GM term but everyone knows it really means 6-BBL (or Six Pack if it were a Dodge). And the well-sorted hardtop has another nice feature in it that is part of what made ’70 Road Runners cool, the “Dust Trails” side graphics. Stylish and still a factory-looking Mopar muscle machine.

Sawtooth Motorsports’ 1971 Plymouth ‘Cuda
Yes, the 1971 Barracuda convertible is something not seen too often these days. Sawtooth Motorsports (Namba, Idaho) took one and did it up as a custom build complete with Gen 3 392 HEMI with Holley Terminator fuel management system, backed with a Tremec 5-speed (Piston Grip Hurst shifter, of course) and Italian leather interior.

When it came time to add some side lettering, rather than do the factory bill board thing a simple side stripe with “‘Cuda” lettering was incorporated. Different yes, and it adds to its new personality.

SSBC’s 1968 Dodge Charger 
The 1968 Charger is widely considered as being one of the most iconic Mopar body shapes ever from Mother Mopar, and when seeing the NF EMPIRE display car in the SSBC-USA booth located in the Hot Rod Alley portion of the Central Hall, one look and it was clean that it was built with restraint in overkill wildness. A closer look sees the flush glass, tucked bumpers and the drip rails removed.

The main purpose for the classic B-body being in the booth wasn’t because it received a Hellcat engine transformation, it was because of its brakes. Drilled and slotted big discs, Blue calipers, it was all about displaying that a resto-mod needs really great stopping power. Most all of the exhibits at SEMA were all about speed and power, the SSBC USA booth focus was all about getting that projectile stopped! A nice touch on the Charger was the Bumble Bee stripe with Hellcat insignia, just to point out where the power comes from.

James Maxwell
James Maxwell
James' entry into the performance business started as a teen, working at the local speed shop, and later in Southern California at Super Shops doing wholesale, plus placing orders for Hooker, Centerline, Mopar Direct Connection & more. He later helped sponsor DeFrank & Cohen's Super Stock '68 Barracuda. Many years of Mopar-specific car shoots and the excitement of 15 years starting line photography at NHRA events.

Related Posts

LEAVE A REPLY

Please enter your comment!
Please enter your name here
Captcha verification failed!
CAPTCHA user score failed. Please contact us!

Advertise With Us

Rate Card