Is your classic Mopar’s front suspension feeling a little worn out? How about sluggish in the corners or just sagging while sitting still? It’s very likely that your strut bars are worn out and require replacing and that’s where QA1 Street Performance & Racing Suspension Components come in with their Dynamic Strut Bars for Mopar A-Body, B-Body & E-Body platforms.

Made from 6061-T6 aluminum and anodized, QA1’s Dynamic Strut Bars don’t require any bushings, and are a direct bolt-in for an aftermarket or factory K-Member replacement. Best of all, these bars are fully adjustable and come with rod ends. Simply bolt them in and you’re up and ready to go. Obviously, these make a great pair with QA1’s tubular upper and lower control arms, not to mention their hand-fabricated tubular Mopar K-members.

Each of these items are designed to not only shave off valuable weight from your performance-bred classic Mopar, but also add much needed strength and durability over the stamped, mass-produced parts that Chrysler hammered out at the lowest cost possible. If you’re pushing your Mopar to new heights don’t cut yourself short by not improving the rest of the car’s handling and suspension. Go with QA1’s Street Performance & Racing Suspension Components (and complete kits) HERE.