Mopar Connection Archives - Page 10 of 12 - Mopar Connection Magazine | A comprehensive daily resource for Mopar enthusiast news, features and the latest Mopar techMopar Connection Magazine | A comprehensive daily resource for Mopar enthusiast news, features and the latest Mopar tech

Engine

Hughes Engines Tech Center: 700HP Small Block Is Straight Up ...

Kent Will

September 9, 2021

Pushing redline in a small block Mopar is a feeling unlike that which any B or RB engine can provide. The short stroke’s ability to spin up at such an incredible rev rate is what ...

9705

Car Features

Gallery: Kate Toutkoushian Carries On the Top Cat Family Racing ...

Patrick Rall

September 6, 2021

The odds are good that if you have paid any attention to the progress made by the early Dodge Challenger SRT Hellcat owners who were the first to add big power, you know the name ...

2508

News

Video: Unboxing A Bill Mitchell Products Aluminum Block With Griffitts ...

Kent Will

August 31, 2021

Freshly-melted aluminum continues to pour into Mopar shops across the country as Bill Mitchell Products (BMP) pumps out a parade of new 426 and 440 blocks. Weighing in at approximately 140 pounds, the 440 version ...

1775

Interior

Gallery: DIY Fix For A Floppy Rear View Mirror

Kent Will

August 24, 2021

Stomping on the loud pedal can bring on a rush of sensory experiences ranging from the deafening roar of the engine to the smell of freshly-cooked rubber on heated pavement. For our 1969 Dodge Super ...

3165

News

The Wharton Automotive Group Acquires Silver Sport Transmissions

Kevin Shaw

August 12, 2021

[Editor’s note: This is some pretty big news, and I’m going to wax a little personal for a minute. You can skip down a couple paragraphs if you don’t want to read the sappy ...

1760

New Products

Flaming River’s Custom Columns Can Fit Any Ol’ Classic Mopar

Kent Will

August 11, 2021

It seems like factory parts rarely fit as perfectly as intended once the modification momentum gets moving on a muscle car. One upgrade leads to another, which requires yet another, and the train rolls on ...

1169

New Products

Moser Has 8.75 Housing & Axle Packages Prescribed For Power

Kent Will

August 9, 2021

After more than fifty years’ worth of use and abuse, it can be hard to gauge the quality and correctness of factory-installed parts. Rear end housings, for example, bore the full brunt of a big-block’s ...

1560

News

Reilly Motorsports Now Offers Wilwood Compatible Moser Axles

Kevin Shaw

August 5, 2021

When it comes to modifying your Mopar, oftentimes you’re left trekking through uncharted territory. Thankfully, with the advent of the internet researching how and whether a certain part will work or not has become demonstrably ...

1337

News

Video: Inside Flaming River Industries with CEO Jeanette ladina

Kevin Shaw

August 4, 2021

This inside view of Flaming River Industries gives you a far better look at not only the history of President & Ceo Jeanette Ladina and her involvement with Flaming River Industries, but also her passion ...

1901

Engine

Hughes Engines Tech Center: How Can A G3 Hemi Hammer ...

Kent Will

August 2, 2021

Hemi cylinder heads, both vintage and modern, have shown time and again that they’re able to support big power, especially in ported form. Couple them with the right combination of hi-po parts and it’s plenty ...

1852

Tag: Mopar Connection