Get 1,000 Horsepower Out of Your Gen III Hemi with a FAST Supercharger and Cam Power Package. Summit Racing has just started carrying FAST Supercharger and Camshaft kits for your 3^rd Gen Hemi. The FAST Supercharger and Cam Power Package fits 2011-18 engines with VVT.

Build yourself a big-horsepower 5.7L or 6.4L Gen III Hemi with a FAST Supercharger and Cam Power Package. Capable of making 1,000-plus horsepower, the package features an Edelbrock Eaton 2650 TVS supercharger; a matching COMP Cams hydraulic roller camshaft; a phaser limiter kit; pushrods; and a valve spring kit.

What’s more, FAST includes a pump gas-friendly supercharger pulley for initial tuning and general performance driving plus a smaller pulley for maximum power on race fuel or E85. That’s pretty cool.

Here’s what you get:

Edelbrock Supercharger

• Four-lobe design with 170 degrees of twist for maximum flow, minimum temperature rise, and quiet operation
• Patented integrated intercooler with 45% more cooling area to lower inlet air charge temperatures
• Integrated bypass valve helps eliminate parasitic loss under light throttle
• 3.500-inch pulley for engine break-in, initial tuning, and general performance driving
• 2.625-inch pulley when maximum power is desired on race fuel or E85

COMP Cams HRT Camshaft

• 2,000-7,000 RPM range
• 229°/241° duration @ .050-inch valve lift
• .635/.635 inch lift
• 117° LSA

COMP Cams Valve Spring Kit

• 1.322-inch diameter conical single springs
• 520 lbs./in. spring rate
• Chromoly steel retainers
• Valve locks and seals
• Spring seats and shims

Other Components

• COMP Cams phaser limiter
• COMP Cams Hi-Tech pushrods
• Accessory drive pulleys, serpentine belt, and belt tensioner
• Fuel lines and rails
• Wiring harness

For more information about the new FAST Supercharger and Camshaft kit available from Summit Racing visit www.summitracing.com. To speak with one of Summit Racings’ sales technicians, call 1-800-230-3030.