HomeTech

Tech

The General Rides Again: Everything You Need to Know To Build a Correct General Lee

In 1978, a decision was made over at Warner Brothers to film at least five episodes of a brand new TV series called “The...

Gallery: “Comeback ‘Cuda” 426 Hemi Dyno Test & Engine Rebuild (Video)

While the “Comeback ‘Cuda” body is at AMD Installations being fitted with new steel from Classic Muscle Metal in Cleveland, Georgia, it was time...

Gallery: How to Restore a Vent Wing Assembly (With Door Glass)

More times than not, a restored car will have been painted, the engine rebuilt, new tires, nice interior, but the vent wing assembly will...

Gallery: Putting Finish Renu Degreasers To The Test

"Never trust a skinny chef" were the words of wisdom once shared to me by former Mopar Muscle editor Randy Bolig some dozen years...

Gallery: Patching Floor Pans In a B-Body Made Easy

B-bodies have several common rust issues, and the front floor pans are near the top of the list. The driver side is usually the...

Gallery: Installing American Powertrain’s Reverse Lock Out Module

Who would ever guess that one of the biggest issues we face with an install of a T56 or TR6060 is shifting into reverse?...

Go Manual With Passon Performance’s 4-Speed Conversion Kit

Sadly, not all Mopars were outfitted with 4-speeds and finding one isn’t easy. Even if you find a manual car that might have had...

Gallery: Installing a Factory-Replacement Flaming River Tilt Steering Column

Admittedly, we were either too getting old or fat (or maybe both), but climbing in and out of our caged '69 Dodge Charger project...

Modernizing Your A-Body’s Rear Suspension With QA1

While originality certainly has its charms, when it comes to automotive design, there’s no denying that the past four or five decades have seen...

Gallery: Installing a Finch Performance Shifter and Boot From American Powertrain

We were chatting with Gray Fredrick at American Powertrain a couple of weeks ago about the upcoming SEMA show and asked if they had...

Advertise With Us

Rate Card

Chunky Monkey: 8¾ Rear End Center Section Rebuild

If you're building a classic Mopar muscle car, chances are if your machine came from the factory with anything bigger than an 318, you've...

The General Rides Again: Everything You Need to Know To Build a Correct General Lee

In 1978, a decision was made over at Warner Brothers to film at least five episodes of a brand new TV series called “The...

Swap a Modern HEMI Into Your Classic Mopar with Mopar’s New Crate HEMI Engine Kits

With modern HEMI swaps into old Mopars becoming quite popular, Mopar has decided to step up their game with a fantastic announcement at the...

What You May Not Know About The “Vanishing Point” 1970 Dodge Challenger R/T

"Vanishing Point"; it’s a name well known in the Mopar community. Many have seen the movie but surprisingly, quite a few haven’t. Spoiler alert...

Go Manual With Passon Performance’s 4-Speed Conversion Kit

Sadly, not all Mopars were outfitted with 4-speeds and finding one isn’t easy. Even if you find a manual car that might have had...

Gallery: ’66-’70 B-Body 8.75 Rear Differential Identifiers & Markings

For 1966-1970 Plymouth and Dodge B-bodies there were three basic rear end assemblies that were available: the 8¼, the 8¾, and the 9¾ Dana...
0
Spend $500.00 more to get free US shipping
Empty Cart Your Cart is Empty!

It looks like you haven't added any items to your cart yet.

Browse Products
Powered by Caddy